Does your car have a rock chip or a bulls-eye that obscure your vision when you drive? Do you have an idea how to get rid of them? The solution to that problem is simple. You need to buy yourself windshield repair kit. Many people have already claimed that this kit really works. The only challenge you’ll have is fixing the running cracks. Although it will be challenging, there are other products that still claim that it could be repaired.
In using windshield repair kit to repair your windshield, there are proper steps that you need to follow. Each tool inside the windshield repair kit has its own specific function. You need to know each of that function carefully so you cold use them effectively. That’s why the very first step that you need to do before you proceed to the repair is you need to read all the procedures, instructions and directions in the manual. Make sure that you properly understand each functions and steps. Here are the tips on how to properly use windshield repair kit.
The first step that you need to do in repairing your windshield is to clean the damage area of the glass. In running cracks or chip, there are tiny pieces of glass which you need to pick out using razor blade. These loose pieces of glass inside the damaged area could throw off the repair process. That’s why they need to be carefully picked out. Then, you also need to clean section of the glass where you will place the suction cup tool; you could use the glass cleaner to properly clean the surface.
After cleaning the surface, before you proceed to the next step, make sure that you allow a lot of time for the damaged area to dry completely. After the area has dried up, you need to position the suction cup tool so the threaded center of the section is directly over the chipped area. Then you have to firmly press the suction cups into place, try to check if the four arms are secured.
Thread the repair tube into the suction cup tool since the suction cup is directly over the damaged area. You may need to screw it tightly but don’t use any tools, just your hands. The proper alignments of the tools are very essential in repairing windshield, which is why you have to check from inside the car if the rubber is directly on the top of the damage area. Now you have to open up the supper tube and add it to the repair tube. Add drops of repair resin and then put a film underneath the resin and let it dry for ten minutes.
